Running out of time…

We’ve set a self-imposed deadline of July 19th to have the car on the road, so we can take it to Billing. Then we took a look at our schedules and realised that we only have six build days left! We’ll work it out somehow.

The rear winch mounts are on, which can probably be best described by some photos:

The angle iron that will eventually hold the rear winch in place

The angle iron that will eventually hold the rear winch in place

Fitting the winch

Fitting the winch

Welding the plates in place

Welding the plates in place

Undercoat

Undercoat

And finished

And finished

The rest of the day was spent on bodywork (again). We’ve finished up the side panels, and riveted practically everything on.

Riveting stuff

Riveting stuff (and look - the rad is finally fitted!)

The only bodywork left to fix on is the front wings, rear light panels and bonnet (in so much as that is fixed). We also need to add some metal finishing strips to the rear of the car to cover up some creative bodywork adjustment.

All the external bodywork is on! Note the seat dumped on the right of the picture

All the external bodywork is on! Note the seat on the right of the picture

We also started to hack the dashboard to bits to make it fit around the wiper motor, with further hacking required to make the original instrument panel fit into it.

And that’s it! We’re not going to do anything else until the 14th June. Still on our “To do” list for the MOT:

  • Dashboard
  • Electrics
  • Battery and air pump box
  • Front winch
  • Front bumper
  • Rad pipes
  • Exhaust
  • Steering guard
  • Diff guard(s)
  • Wing mirrors
  • Fit windscreen
  • Wiper blades
  • Windscreen washers
  • Front lights
  • Rear lights
  • Rear brake lines
  • Fit bonnet
  • Fit front wings
  • Rear propshaft
  • Fuel lines
  • Air intake and snorkel
  • Fit Seats and harnesses
  • Check fluids
  • Start engine!

Six days..?

2 Responses to “Running out of time…”

  1. Ben Says:

    Hey Matt, just stumbled across your site… keep up the good work, tomcat is looking good!

    I live in Barbados and built a tomcat down here with alot of advice from Paul and a visit from John Cockburn at one point
    you can check out the build here: http://getdirty.me/viewtopic.php?f=12&t=676

    Any questions i’ll do my best to help

  2. Matt Says:

    I think my questions can only be answered if I come and visit. When shall I arrive? :)

Leave a Reply